Sold
1996 Engel
3000 Ton | 282 oz oz
General Specifications
| Year | 1996 |
| Brand | Engel |
| Tonnage | 3000 Ton |
| Shot Size | 282 oz oz. |
| Region |
|
| Model Number | ES14000-3000 |
| Type | horizontal |
| Options & Upgrades | 2 Core Pull on both platens, Herzog shut off nozzle, Electric Screw Drive, Clamp Piston Seal replaced, ANSI safety upgrades,, Mattec Interface retrofit, High wear screw and barrel, Quick mold change blocks, 9 Mold Gates, 36 HR Zones, 2 comp Air Circuits |
| Machine Notes | Around $200,000 in spare parts included with machine |
Technical Specifications
| Clamp |
|
| Tie Bar Distance | 82.68" inches x 66.93" inches |
| Platen Size | 124.41" inches x 110.24" inches |
| Daylight Min | 31.57" inches |
| Daylight Max | 165.35" inches 78.74" Max Mold Height |
| Core Pull Sequences | Yes 2 Cores on each platen |
| Types of Controls | CC100 A01 |
| Voltage | 480 |
Condition
| Overall Condition | Good |
| Barrel & Screw | Very Good |
| Condition Notes | Recent Upgrades: Clamp Piston Seal Replacement (2014), Press had ANSI upgrades for safety (2012), Moving Platen Wheel and Bearing Replaced (2016), Injection Unit Seal Replaced (2015), Mattec Interface Retrofit (2015), High Wear Screw, Barrel (2011), QSO Valve Replacement (2011), Auxiliary Sequential Valve Gate Controller |